Jump to: 2025 | 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2004 | 2001 | 2000 | 1999 | 1997
2025
Raw data for figures (2025)[Dataset Types › Dataset]. Zenodo. Mueller, J., Goulas, C. & Hensel, J.https://doi.org/10.5281/zenodo.15124280Magnetic Nozzle‐Free Embedded 3D (MagNoFE3D) Printing (2025)Advanced Materials Technologies, 10(5). Article 2401097. Piñan Basualdo, F. N., Trikalitis, V. D., Visconti, S., Ficuciello, F., Goulas, C., Rouwkema, J. & Misra, S.https://doi.org/10.1002/admt.202401097Wireless mechanical and hybrid thrombus fragmentation of ex vivo endovascular thrombosis model in the iliac artery (2025)Applied physics reviews, 12(1). Article 011416. de Boer, M. C. J., Ligtenberg, L.-J. W., Mulder, I., Goulas, C., Klingner, A., Lomme, R., Rot, E. A. M. K., Wasserberg, D., Lu, Y., Liefers, R., van der Mijle Meijer, J. K., Tuijthof, G. J. M., Ben Ami, D., Sadeh, U., Shoseyov, O., Leclerc, J., Becker, A. T., Jonkheijm, P., Warlé, M. & Khalil, I. S. M.https://doi.org/10.1063/5.0233677Author Correction: Ex vivo validation of magnetically actuated intravascular untethered robots in a clinical setting: Ex vivo validation of magnetically actuated intravascular untethered robots in a clinical setting (Communications Engineering, (2024), 3, 1, (68), 10.1038/s44172-024-00215-2) (2025)Communications Engineering, 4. Article 16 (E-pub ahead of print/First online). Ligtenberg, L.-J. W., Rabou, N. C. A., Goulas, C., Duinmeijer, W. C., Halfwerk, F. R., Arens, J., Lomme, R., Magdanz, V., Klingner, A., Rot, E. A. M. K., Nijland, C. H. E., Wasserberg, D., Liefers, H. R., Jonkheijm, P., Susarrey-Arce, A., Warlé, M. & Khalil, I. S. M.https://doi.org/10.1038/s44172-025-00353-1
2024
Additive manufacturing of architected shape memory alloys: a review (2024)Virtual and Physical Prototyping, 19(1). Article e2414395. Mehrpouya, M., Alberto Biffi, C., Lemke, J. N., Bregoli, C., Fiocchi, J., Mohajerani, S., Tuissi, A. & Elahinia, M.https://doi.org/10.1080/17452759.2024.2414395Ex vivo validation of magnetically actuated intravascular untethered robots in a clinical setting (2024)Communications Engineering, 3. Article 68. Ligtenberg, L.-J. W., Rabou, N. C. A., Goulas, C., Duinmeijer, W., Halfwerk, F. R., Arens, J., Lomme, R., Magdanz, V., Klingner, A., Klein Rot, E. A. M., Nijland, C. H. E., Wasserberg, D., Liefers, H. R., Jonkheijm, P., Susarrey-Arce, A., Warlé, M. & Khalil, I. S. M.https://doi.org/10.1038/s44172-024-00215-2Mechanical response of LPBFed TI64 thickness graded Voronoi lattice structures (2024)Materialia, 38. Article 102234. Bregoli, C., Fiocchi, J., Mehrpouya, M., Vergani, L. M., Tuissi, A. & Biffi, C. A.https://doi.org/10.1016/j.mtla.2024.102234Automation feasibility assessment tool (2024)[Thesis › EngD Thesis]. University of Twente. Karamipour, E.https://doi.org/10.3990/1.9789036563451More than 10 years of industry 4.0 in the Netherlands: an opinion on promises, achievements, and emerging challenges (2024)International Journal of Sustainable Engineering, 17(1), 1-12. Martinetti, A., Nizamis, K., Chemweno, P. K., Goulas, C., van Dongen, L. A. M., Gibson, I., Thiede, S., Lutters, E., Vaneker, T. H. J. & Bonnema, G. M.https://doi.org/10.1080/19397038.2024.23273804D Printing of PLA/PBS Biopolymers: Impact of Polymer Grade Variations on Thermomechanical Performance (2024)Advanced engineering materials, 26(22). Article 2401705. Ghalayaniesfahani, A., Oostenbrink, B., van Kasteren, H. & Mehrpouya, M.https://doi.org/10.1002/adem.202401705Learning from strangers: transferability of current principles for designing inclusive area-based settlements to learning factories in resource-limited settings (2024)Procedia CIRP, 128, 215-220. Martinetti, A., Trauernicht, N. & Chemweno, P. K.https://doi.org/10.1016/j.procir.2024.07.048Impact of Surface Finishing on Ti6Al4V Voronoi Additively Manufactured Structures: Morphology, Dimensional Deviation, and Mechanical Behavior (2024)Materials, 17(19). Article 4879. Bregoli, C., Mohajerani, S., Fiocchi, J., Mehrpouya, M., Elahinia, M., Tuissi, A., Vergani, L. M. & Biffi, C. A.https://doi.org/10.3390/ma17194879Fine Porous Structures Fabricated Using Laser Powder Bed Fusion of Ti–6Al–4 V (2024)In Additive Manufacturing in Multidisciplinary Cooperation and Production (pp. 133-143) (Springer Tracts in Additive Manufacturing; Vol. Part F3255). Springer. Sanchez, S., Zafari, A., Demir, A. G., Caprio, L., Previtali, B., Holynska, M., Gibson, I. & Jafari, D.https://doi.org/10.1007/978-3-031-37671-9_12Multimaterial 3D Printing of Programmable Architected Structures (2024)In Additive Manufacturing in Multidisciplinary Cooperation and Production (pp. 171-178) (Springer Tracts in Additive Manufacturing; Vol. Part F3255). Springer. Mehrpouya, M., Postmes, J. F., Ghalayaniesfahani, A. & Gibson, I.https://doi.org/10.1007/978-3-031-37671-9_15Modelling the laser surface hardening process in a steel with a spheroidized initial microstructure (2024)Journal of Manufacturing Processes, 125, 364-373. Castro Cerda, F. M., Goulas, C., Jones, D., Kamyabi, A., Hamre, D., Méndez, P. & Wood, G.https://doi.org/10.1016/j.jmapro.2024.07.052Comparative judgment: Assessing competence development in the context of humanitarian engineering education (2024)[Contribution to conference › Paper] 52nd SEFI Annual Conference 2024. Nizamis, N., van Mensvoort, W. S. H., Chemweno, P. K. & Martinetti, A.https://doi.org/10.5281/zenodo.142547344D printing of biobased shape memory sandwich structures (2024)Polymer, 307. Article 127252. Ghalayaniesfahani, A., Oostenbrink, B., van Kasteren, H., Gibson, I. & Mehrpouya, M.https://doi.org/10.1016/j.polymer.2024.127252Learning Factory Concept Tailored for Engineering Programmes for Underserved Communities (2024)In Learning Factories of the Future - Proceedings of the 14th Conference on Learning Factories 2024 (pp. 75-82) (Lecture notes in networks and systems; Vol. 1060). Springer. Chemweno, P. K., Ghafoorpoor Yazdi, P., Berends, M., Bruijnjé, M., Martinetti, A. & Trauernicht, N.https://doi.org/10.1007/978-3-031-65400-8_9Additive manufacturing of NiTi architected metamaterials (2024)Additive Manufacturing Letters, 10. Article 100216. Biffi, C. A., Soyarslan, C., Fiocchi, J., Bregoli, C., du Plessis, A., Tuissi, A. & Mehrpouya, M.https://doi.org/10.1016/j.addlet.2024.100216Analysis of thermal cycles during DED-Arc of high-strength low-alloy steel and microstructural evolution (2024)Journal of Materials Research and Technology, 31, 3661-3674. Müller, J., Goulas, C. & Hensel, J.https://doi.org/10.1016/j.jmrt.2024.07.066Sky Images for Short-Term Solar Irradiance Forecast: A Comparative Study of Linear Machine Learning Models (2024)IEEE journal of photovoltaics, 14(4), 691-698. Shirazi, E., Gordon, I., Reinders, A. & Catthoor, F.https://doi.org/10.1109/JPHOTOV.2024.3398365Model Tuning and Performance Evaluation in Machine Learning Models for PV Power Forecasting: Case Study of a BIPV System in Switzerland (2024)In 2024 IEEE 52nd Photovoltaic Specialist Conference (PVSC) (pp. 438-442). Article 10748823. IEEE. Shirazi, E. & Quest, H.https://doi.org/10.1109/PVSC57443.2024.10748823Multi-objective Optimization for Phase Balancing in an Energy Community with High PV Penetration and a Shared Energy Storage System (2024)In IEEE 52nd Photovoltaic Specialist Conference, PVSC 2024 (pp. 430-434). Article 10749142. IEEE. Ahmadi, B. & Shirazi, E.https://doi.org/10.1109/PVSC57443.2024.10749142Numerical and Experimental Studies of Laser Powder Bed Fusion Processes (2024)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Shaheen, M. Y.https://doi.org/10.3990/1.9789036561310EDUBox: finding suitable locations for offgrid mobile classrooms in the context of underserved communities (2024)Journal of International Humanitarian Action, 9(7). Article 7. Martinetti, A., Trauernicht, N., Dietrich, M. & Chemweno, P. K.https://doi.org/10.1186/s41018-024-00149-6Fabrication of low thermal expansion Fe–Ni alloys by in-situ alloying using twin-wire arc additive manufacturing (2024)Materials & Design, 240. Article 112837. Sood, A., Schimmel, J., Bosman, M., Goulas, C., Popovich, V. & Hermans, M. J. M.https://doi.org/10.1016/j.matdes.2024.112837Mechanical performance of 22SiMn2TiB steel welded with low-transformation-temperature filler wire and stainless steel filler wire (2024)Journal of Iron and Steel Research International, 31(4), 967-981. Lin, Z. d., Song, K. j., Sun, Z., Zhu, Z. q., Zhao, X. f., Goulas, C., Ya, W. & Yu, X. h.https://doi.org/10.1007/s42243-023-01098-xQuantitative sustainability assessment of metal additive manufacturing: A systematic review (2024)CIRP journal of manufacturing science and technology, 49, 95-110. Pusateri, V., Hauschild, M. Z., Kara, S., Goulas, C. & Olsen, S. I.https://doi.org/10.1016/j.cirpj.2023.12.005Tailoring mechanical properties in 3D printed multimaterial architected structures (2024)Journal of the mechanical behavior of biomedical materials, 152. Article 106431. Mehrpouya, M., Ghalayaniesfahani, A., Postmes, J. F. & Gibson, I.https://doi.org/10.1016/j.jmbbm.2024.106431Temporal and Spatial Beam Shaping in LPBF for Fine and Porous Ti-Alloy Structures for Regenerative Fuel Cell Applications (2024)Lasers in Manufacturing and Materials Processing, 11(1), 154-178. Sanchez, S., Zafari, A., Caprio, L., Demir, A. G. & Jafari, D.https://doi.org/10.1007/s40516-023-00244-3Modeling the effect of processing parameters on temperature history in Directed Energy Deposition: an analytical and finite element approach (2024)Rapid prototyping journal, 30(2), 338-349. Ghasempour-Mouziraji, M., Afonso, D., Hosseinzadeh, S., Goulas, C., Najafizadeh, M., Hosseinzadeh, M., Ganji, D. D. & Alves de Sousa, R.https://doi.org/10.1108/RPJ-05-2023-0165Mechanical and Biocorrosion Properties of Ti-XSn (X = 0, 5, 10, 15 wt.%) Alloys for Biomedical Application Fabricated by Powder Metallurgy (2024)Metallography, Microstructure, and Analysis, 13, 18-28. Najafizadeh, M., Bozorg, M., Yazdi, S., Sarrafan, N., Ghasempour-Mouziraji, M., Goulas, C. & Cavaliere, P.https://doi.org/10.1007/s13632-023-01034-1Characterization and Diffusion Kinetics of Silicon on AISI D2 Steel (2024)Silicon, 16(2), 811-820. Najafizadeh, M., Ghasempour-Mouziraji, M., Goulas, C., Hosseinzadeh, M., Bozorg, M. & Cavaliere, P.https://doi.org/10.1007/s12633-023-02725-8Deployment of Solar Photovoltaic Systems in Distribution Grids in Combination with Batteries (2024)In Photovoltaic Solar Energy: From Fundamentals to Applications, Volume 2 (pp. 435-454). Wiley-Hindawi. Shirazi, E., van Sark, W. & Reinders, A.https://doi.org/10.1002/9781119578826.ch27Framework for additive manufacturing of porous Inconel 718 for electrochemical applications (2024)Materials & Design, 237. Article 112606. Zafari, A., Kiran, K., Gimenez-Garcia, I., Xia, K., Gibson, I. & Jafari, D.https://doi.org/10.1016/j.matdes.2023.112606Measurement of effective thermal conductivity of composite powders of 2D materials and metals for additive manufacturing (2024)Journal of physics: Conference series, 2766. Article 012186. Lee, H., Koutsioukis, A., Jafari, D., Geurts, B. J. & Wits, W. W.https://doi.org/10.1088/1742-6596/2766/1/012186
2023
Design with Luminescent Solar Concentrator Photovoltaics in the Built Environment (2023)In 2023 IEEE 50th Photovoltaic Specialists Conference (PVSC) (pp. 1-5). Article 10359769. IEEE. Shirazi, E., Eggink, W. & Reinders, A. H. M. E.https://doi.org/10.1109/PVSC48320.2023.10359769Optimal Allocation of Voltage Regulations to Maximize the Hosting Capacity of Distribution Systems (2023)In 2023 IEEE 50th Photovoltaic Specialists Conference (PVSC) (pp. 1-6). Article 10359634. IEEE. Ahmadi, B. & Shirazi, E.https://doi.org/10.1109/PVSC48320.2023.10359634Helical Propulsion in Low-Re Numbers with Near-Zero Angle of Attack (2023)In 2023 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (pp. 2647-2652). IEEE. Ligtenberg, L.-J. W., Ekkelkamp, I. A. A., Halfwerk, F. R., Goulas, C., Arens, J., Warlé, M. & Khalil, I. S. M.https://doi.org/10.1109/iros55552.2023.10341627Service Restoration in Distribution Networks Based on a Two-Stage Power Flow Model (2023)In 2023 31st International Conference on Electrical Engineering (ICEE) (pp. 640-646). Article 10334636. IEEE. Armand, S., Heidary, J. & Shirazi, E.https://doi.org/10.1109/ICEE59167.2023.10334636Effect of heat treatment on microstructure and functional properties of additively manufactured NiTi shape memory alloys (2023)Journal of alloys and compounds, 967. Article 171740. Zhu, J.-N., Zhu, W., Borisov, E., Yao, X., Riemslag, T., Goulas, C., Popovich, A., Yan, Z., Tichelaar, F. D., Mainali, D. P., Hermans, M. & Popovich, V.https://doi.org/10.1016/j.jallcom.2023.171740Vision on metal additive manufacturing: Developments, challenges and future trends (2023)CIRP journal of manufacturing science and technology, 47, 18-58. Bernard, A., Kruth, J. P., Cao, J., Lanza, G., Bruschi, S., Merklein, M., Vaneker, T., Schmidt, M., Sutherland, J. W., Donmez, A. & da Silva, E. J.https://doi.org/10.1016/j.cirpj.2023.08.005The effect of adding Sn on the mechanical properties and microstructure of the titanium (2023)Materials letters, 351. Article 135044. Najafizadeh, M., Bozorg, M., Ghasempour-Mouziraji, M., Goulas, C. & Cavaliere, P.https://doi.org/10.1016/j.matlet.2023.135044Optimization of the Si3N4 coating formation through plasma spraying on Inconel 738 (2023)Tribology : materials, surfaces and interfaces, 17(4), 338-351. Najafizadeh, M., Ghasempour-Mouziraji, M., Shahrani, S., Bozorg, M., Goulas, C., Hosseinzadeh, M., Cavaliere, P., Perrone, A. & Perrone, S.https://doi.org/10.1080/17515831.2023.2245999A Heuristic-Driven Charging Strategy of Electric Vehicle for Grids with High EV Penetration (2023)Energies, 16(19). Article 6959. Ahmadi, B. & Shirazi, E.https://doi.org/10.3390/en16196959To bend or not to bend: Impact on heat pipe performance (2023)In 2023 29th International Workshop on Thermal Investigations of ICs and Systems, THERMINIC 2023 (pp. 1-6). Article 10325908 (International Workshop on Thermal Investigations of ICs and Systems (THERMINIC); Vol. 2023). IEEE. Wits, W. W., Groot, R. & Jafari, D.https://doi.org/10.1109/THERMINIC60375.2023.10325908Microstructure and mechanical properties of wire and arc additive manufactured thin wall with low-temperature transformation (2023)Journal of materials science, 58(32), 13183-13204. Song, K., Lin, Z., Zhu, Z., Zhao, X., Ya, W., Goulas, C., Li, Y. & Yu, X.https://doi.org/10.1007/s10853-023-08645-7Framework for additive manufacturing of porous Inconel 718 for electrochemical applications (2023)[Working paper › Preprint]. ArXiv.org. Zafari, A., Kiran, K., Gimenez-Garcia, I., Forner-Cuenca, A., Xia, K., Gibson, I. & Jafari, D.https://doi.org/10.48550/arXiv.2308.03536Constrained Equilibrium Reactions in a Low Carbon Steel During Heat Treatments Below the MS (2023)Steel research international, 94(8). Article 2200841. Castro Cerda, F. M., Goulas, C., Hernández, E. I., Sanhueza, J. P., Ros-Yanez, T. & Petrov, R. H.https://doi.org/10.1002/srin.202200841A taxonomy of short-term solar power forecasting: Classifications focused on climatic conditions and input data (2023)IET Renewable Power Generation, 17(9), 2411-2432. Bazionis, I. K., Kousounadis-Knousen, M. A., Georgilakis, P. S., Shirazi, E., Soudris, D. & Catthoor, F.https://doi.org/10.1049/rpg2.12736Directed energy deposition of Invar 36 alloy using cold wire pulsed gas tungsten arc welding: Effect of heat input on the microstructure and functional behaviour (2023)Journal of Materials Research and Technology, 25, 6183-6197. Sood, A., Schimmel, J., Ferreira, V. M., Bosman, M., Goulas, C., Popovich, V. & Hermans, M. J. M.https://doi.org/10.1016/j.jmrt.2023.06.280Energy absorbing 4D printed meta-sandwich structures: load cycles and shape recovery (2023)International journal of advanced manufacturing technology, 127(3-4), 1779-1795. Gisario, A., Desole, M. P., Mehrpouya, M. & Barletta, M.https://doi.org/10.1007/s00170-023-11638-0The effect of multiple thermal cycles on Ti-6Al-4V deposits fabricated by wire-arc directed energy deposition: Microstructure evolution, mechanical properties, and corrosion resistance (2023)Journal of alloys and compounds, 947. Article 169614. Lin, Z., Goulas, C., Li, Y., Fa, Y., Qiao, L., Sun, Z., Cao, R., Ya, W. & Yu, X.https://doi.org/10.1016/j.jallcom.2023.169614Educating for integrity: Blending the liberal arts and humanitarian engineering (2023)In Proceedings of the 19th International CDIO Conference. Frank, J., Petrová, N., Chemweno, P. K. & Martinetti, A.Additive Manufacturing of Biopolymers: Handbook of Materials, Techniques, and Applications (2023)[Book/Report › Book editing]. Elsevier Doyma. Mehrpouya, M. & Vahabi, H.https://doi.org/10.1016/C2021-0-02412-3Theoretical and experimental investigation of rotating heat pipes (2023)[Contribution to conference › Paper] Joint 21st International Heat Pipe Conference and 15th International Heat Pipe Symposium. Wits, W. W., Rompelman, H., Jeggels, Y., Jafari, D. & Engelberts, N.The status of implementation of photovoltaic systems and its influencing factors in European countries (2023)Progress in Photovoltaics, 31(2), 113-133. Raghoebarsing, A., Farkas, I., Atsu, D., Boddaert, S., Moser, D., Shirazi, E. & Reinders, A.https://doi.org/10.1002/pip.3613Additive manufacturing of biopolymers (2023)In Additive Manufacturing of Biopolymers: Handbook of Materials, Techniques, and Applications (pp. 1-10). Elsevier Doyma. Mehrpouya, M. & Vahabi, H.https://doi.org/10.1016/B978-0-323-95151-7.00002-8Integrating challenge-based learning into a mobile classroom environment for Jordanian camp refugees: a position paper (2023)In The refugees in Jordan: A future vision. Jakubeit, N., Petrová, N., Chemweno, P. K. & Martinetti, A.Modelling the laser surface hardening in a ferrite and pearlite initial microstructure (2023)Materials science and technology, 39(18), 3123-3133. Castro Cerda, F. M., Goulas, C., Jones, D., Kamyabi, A., Hamre, D., Méndez, P. & Wood, G.https://doi.org/10.1080/02670836.2023.2240101Planning and Financing Strategy for Clustered Multi-Carrier Microgrids (2023)IEEE Access, 11, 72050-72069. Azimian, M., Habibifar, R., Amir, V., Shirazi, E., Javadi, M. S., Nezhad, A. E. & Mohseni, S.https://doi.org/10.1109/ACCESS.2023.3294482Quantifying injury risks of collaborative robots in a manufacturing cell using a simulation approach (2023)Procedia CIRP, 120, 607-612. Chemweno, P. & Arastehfar, S.https://doi.org/10.1016/j.procir.2023.09.046Solar Energy Harvesting for a Custom Sailing Yacht, a Case Study for Project Zero (2023)In EU PVSEC 2023 (pp. 020435-001 - 020435-004). Krul, A., Wiggers, H. & Shirazi, E.https://doi.org/10.4229/EUPVSEC2023/4DO.4.3Thermal-Comfort Aware Online Co-Scheduling Framework for HVAC, Battery Systems, and Appliances in Smart Buildings (2023)IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, E106.A(5), 698-706. Watari, D., Taniguchi, I., Catthoor, F., Marantos, C., Siozios5, K., Shirazi, E., Soudris, D. & Onoye, T.https://doi.org/10.1587/transfun.2022MAI0001
2022
Multimaterial powder bed fusion techniques (2022)Rapid prototyping journal, 28(11), 1-19. Mehrpouya, M., Tuma, D., Vaneker, T., Afrasiabi, M., Bambach, M. & Gibson, I.https://doi.org/10.1108/RPJ-01-2022-00143D printed Magnetically Deformable Hydrogels in a Granular Medium for Tissue Engineering applications (2022)[Contribution to conference › Poster] 31st NBTE Annual Meeting 2022. El Akkawi, M., Trikalitis, V. D., Gibson, I., Goulas, C. & Rouwkema, J.Modelling and Control of Wind Turbine and Battery Energy Storage System for Grid Integration (2022)In 2022 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT-Europe) (pp. 1-6). Article 9960469. IEEE. Khoubseresht, O., Rajabinezhad, M., Ahmadi, B. & Shirazi, E.https://doi.org/10.1109/ISGT-Europe54678.2022.9960469Improving the performance of flat heat pipes by exploiting benefits of additive manufacturing (2022)In THERMINIC 2022 - 28th International Workshop on Thermal Investigations of ICs and Systems, Proceedings (pp. 1-6). IEEE. Jafari, D. & Wits, W. W.https://doi.org/10.1109/THERMINIC57263.2022.9950605Design with Integrated PV Technologies in Various Products and Environments (2022)In 2022 IEEE 49th Photovoltaics Specialists Conference (PVSC) (pp. 731-731). Article 9938809. IEEE. Shirazi, E., Eggink, W., Zhu, X. & Reinders, A.https://doi.org/10.1109/PVSC48317.2022.9938809Flexible electricity price forecasting by switching mother wavelets based on wavelet transform and Long Short-Term Memory (2022)Energy and AI, 10. Article 100192. Iwabuchi, K., Kato, K., Watari, D., Taniguchi, I., Catthoor, F., Shirazi, E. & Onoye, T.https://doi.org/10.1016/j.egyai.2022.100192Prediction and Control of Product Shape Quality for Wire and Arc Additive Manufacturing (2022)Journal of manufacturing science and engineering, 144(11). Article 111005. Ruiz, C., Jafari, D., Venkata, V., Vaneker, T. H. J., Ya, W. & Huang, Q.https://doi.org/10.1115/1.4054721A Surface Roughness Characterization Method for Additively Manufactured Products (2022)In Proceedings of ASME 2022 17th International Manufacturing Science and Engineering Conference (MSEC2022): Vol. 1: Additive manufacturing; Biomanufacturing; Life Cycle Engineering; Manufacturing Equipment and Automation; Nano/Micro/Meso Manufacturing. Article V001T01A031. American Society of Mechanical Engineers. Wang, A., Jafari, D., Vaneker, T. H. J. & Huang, Q.https://doi.org/10.1115/MSEC2022-85697Functional Behavior and Energy Absorption Characteristics of Additively Manufactured Smart Sandwich Structures (2022)Advanced engineering materials, 24(9). Article 2200677. Mehrpouya, M., Edelijn, T., Ibrahim, M., Mohebshahedin, A., Gisario, A. & Barletta, M.https://doi.org/10.1002/adem.202200677Poly(butylene succinate) (PBS): Materials, processing, and industrial applications (2022)Progress in polymer science, 132. Article 101579. Barletta, M., Aversa, C., Ayyoob, M., Gisario, A., Hamad, K., Mehrpouya, M. & Vahabi, H.https://doi.org/10.1016/j.progpolymsci.2022.101579An Experimental Study of Downfacing Surfaces in Selective Laser Melting (2022)Advanced engineering materials, 24(8). Article 2101562. Babu, J. J., Mehrpouya, M., Pijper, T. C., Willemsen, G. & Vaneker, T.https://doi.org/10.1002/adem.202101562EDUBOX: A Self-Contained Engineering Learning Environment for Underserved Communities (2022)In Proceedings of the 18th International CDIO Conference (pp. 703-713) (Proceedings of the International CDIO Conference; Vol. 2022). CDIO. Martinetti, A., Chemweno, P., de Wit, E., Steendam, J. & Nashwan, A.http://www.cdio.org/knowledge-library/documents/edubox-self-contained-engineering-learning-environment-underserved4D printed shape memory sandwich structures: Experimental analysis and numerical modeling (2022)Smart Materials and Structures, 31(5). Article 055014. Serjouei, A., Yousefi, A., Jenaki, A., Bodaghi, M. & Mehrpouya, M.https://doi.org/10.1088/1361-665X/ac60b5PEARL PV Country Reports 2020: Performance and Reliability of Photovoltaic Systems: Evaluations of Large-Scale Monitoring Data (2022)[Book/Report › Report]. University of Twente. Farkas, I., Raghoebarsing, A., Atsu, D., Shirazi, E., Boddaert, S., Moser, D., Pearsall, N. & Reinders, A. H. M. E.https://doi.org/10.3990/1.9789036553629A comparative analysis of maintenance strategies and data application in asset performance management for both developed and developing countries (2022)International journal of quality & reliability management, 39(4), 961-983. Wakiru, J. M., Pintelon, L., Muchiri, P. & Chemweno, P.https://doi.org/10.1108/IJQRM-02-2020-0035Exploring the Added-Value of Integrating Real-Time Location Systems for Tracking Critical Maintenance Tools (2022)Procedia CIRP, 107, 902-907. Chemweno, P., Sullivan, B. P., Bermperidis, G. & Thiede, S.https://doi.org/10.1016/j.procir.2022.05.082Identification and classification of risk factors for human-robot collaboration from a system-wide perspective (2022)Computers & industrial engineering, 163. Article 107827. Berx, N., Decré, W., Morag, I., Chemweno, P. & Pintelon, L.https://doi.org/10.1016/j.cie.2021.107827Improving Geometric Accuracy in Wire and Arc Additive Manufacturing With Engineering-Informed Machine Learning (2022)In ASME 2022 17th International Manufacturing Science and Engineering Conference: June 27–July 1, 2022 West Lafayette, Indiana, USA. Article V001T01A012. American Society of Mechanical Engineers. Ruiz, C., Jafari, D., Subramanian, V. V., Vaneker, T. H. J., Ya, W. & Huang, Q.https://doi.org/10.1115/MSEC2022-85325Innovative robotization of manual manufacturing processes (2022)Procedia CIRP, 106, 96-101. Chemweno, P. & Torn, R.-J.https://doi.org/10.1016/j.procir.2022.02.161Innovative safety zoning for collaborative robots utilizing Kinect and LiDAR sensory approaches (2022)Procedia CIRP, 106, 209-214. Chemweno, P. & Torn, R.-J.https://doi.org/10.1016/j.procir.2022.02.180Microstructural characterisation of thick-walled wire arc additively manufactured stainless steel (2022)Journal of materials processing technology, 299. Article 117373. Palmeira Belotti, L., van Dommelen, J. A. W., Geers, M. G. D., Goulas, C., Ya, W. & Hoefnagels, J. P. M.https://doi.org/10.1016/j.jmatprotec.2021.117373Origami-inspired 4D printing (2022)In Smart Materials in Additive Manufacturing, volume 1: 4D Printing Principles and Fabrication (pp. 373-394). Elsevier Doyma. Mehrpouya, M. & Huang, W. M.https://doi.org/10.1016/B978-0-12-824082-3.00002-7PV DC Yield Determined by Deep Neural Networks: the Case of Building Integrated PV (2022)In Proceedings of 8th World Conference on Photovoltaic Energy Conversion (pp. 780-784) (8th World Conference on Photovoltaic Energy Conversion; 780-783). EU PVSEC. Shirazi, E., Ozkalay, E. & Reinders, A.https://doi.org/10.4229/WCPEC-82022-3BV.3.61Towards a Structured Decision-Making Framework for Automating Cognitively Demanding Manufacturing Tasks (2022)In Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems - Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference CARV 2021 and 10th World Mass Customization and Personalization Conference MCPC 2021 (pp. 190-197) (Lecture Notes in Mechanical Engineering). Springer. Torn, R. J., Chemweno, P., Vaneker, T. & Arastehfar, S.https://doi.org/10.1007/978-3-030-90700-6_21Visco-elastic sintering kinetics in virgin and aged polymer powders (2022)Powder technology, 397. Article 117000. Alvarez, J. E., Snijder, H., Vaneker, T., Cheng, H., Thornton, A. R., Luding, S. & Weinhart, T.https://doi.org/10.1016/j.powtec.2021.11.044
2021
Utilizing additive manufacturing to enhance two-phase heat transfer devices (2021)In 2021 27th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC) (pp. 1-6) (International Workshop on Thermal Investigations of ICs and Systems (THERMINIC); Vol. 2021). Winkelhorst, S., Jafari, D. & Wits, W. W.https://doi.org/10.1109/THERMINIC52472.2021.9626473Integrated remanufacturing, maintenance and spares policies towards life extension of a multi-component system (2021)Reliability engineering & system safety, 215. Article 107872. Wakiru, J., Pintelon, L., Muchiri, P. N. & Chemweno, P. K.https://doi.org/10.1016/j.ress.2021.1078724D printing of shape memory polylactic acid (PLA) (2021)Polymer, 230. Article 124080. Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R. & Ramakrishna, S.https://doi.org/10.1016/j.polymer.2021.124080Process planning for multi-axis additive manufacturing (2021)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Murtezaoglu, F. Y.https://doi.org/10.3990/1.9789036552097A Prediction Model for Additive Manufacturing of Inconel 718 Superalloy (2021)Applied Sciences, 11(17). Article 8010. Ravichander, B. B., Rahimzadeh, A., Farhang, B., Moghaddam, N. S., Amerinatanzi, A. & Mehrpouya, M.https://doi.org/10.3390/app11178010Cloud Detection for PV Power Forecast based on Colour Components of Sky Images (2021)In 2021 IEEE 48th Photovoltaic Specialists Conference, PVSC 2021 (pp. 2389-2391) (Conference Record of the IEEE Photovoltaic Specialists Conference). IEEE. Shirazi, E., Lemmens, J., Gofran Chowdhury, M., Tuomiranta, A., Catthoor, F., Voroshazi, E. & Gordon, I.https://doi.org/10.1109/PVSC43889.2021.9518667Additive manufacturing of polyhydroxyalkanoates (PHAs) biopolymers: Materials, printing techniques, and applications (2021)Materials Science and Engineering C: Materials for Biological Applications, 127. Article 112216. Mehrpouya, M., Vahabi, H., Barletta, M., Laheurte, P. & Langlois, V.https://doi.org/10.1016/j.msec.2021.112216Redefining Safety in Light of Human-Robot Interaction: A Critical Review of Current Standards and Regulations (2021)Frontiers in chemical engineering, 3. Article 666237. Martinetti, A., Chemweno, P. K., Nizamis, K. & Fosch Villaronga, E.https://doi.org/10.3389/fceng.2021.666237Thermal Comfort Aware Online Energy Management Framework for a Smart Residential Building (2021)In 2021 Design, Automation & Test in Europe Conference & Exhibition (DATE) (pp. 535-538). Article 9473922 (Proceedings -Design, Automation and Test in Europe, DATE; Vol. 2021-February). IEEE. Watari, D., Taniguchi, I., Catthoor, F., Marantos, C., Siozios, K., Shirazi, E., Soudris, D. & Onoye, T.https://doi.org/10.23919/DATE51398.2021.9473922Balanced Constrained Carbon Equilibrium Accompanied by Carbide Precipitation (2021)Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52(6), 2155-2157. Castro Cerda, F. M., Goulas, C. & Kestens, L. A. I.https://doi.org/10.1007/s11661-021-06240-6Multi-time scale energy management framework for smart PV systems mixing fast and slow dynamics (2021)Applied energy, 289. Article 116671. Watari, D., Taniguchi, I., Goverde, H., Manganiello, P., Shirazi, E., Catthoor, F. & Onoye, T.https://doi.org/10.1016/j.apenergy.2021.116671Integrated maintenance policies for performance improvement of a multi-unit repairable, one product manufacturing system (2021)Production planning & control, 32(5), 347-367. Wakiru, J. M., Pintelon, L., Muchiri, P. & Chemweno, P.https://doi.org/10.1080/09537287.2020.1736684Flame retardant polymer materials: An update and the future for 3D printing developments (2021)Materials Science and Engineering R: Reports, 144. Article 100604. Vahabi, H., Laoutid, F., Mehrpouya, M., Saeb, M. R. & Dubois, P.https://doi.org/10.1016/j.mser.2020.100604Wire and arc additive manufacturing: Opportunities and challenges to control the quality and accuracy of manufactured parts (2021)Materials & Design, 202. Article 109471. Jafari, D., Vaneker, T. H. J. & Gibson, I.https://doi.org/10.1016/j.matdes.2021.109471The prediction model for additively manufacturing of NiTiHf high-temperature shape memory alloy (2021)Materials today communications, 26. Article 102022. Mehrpouya, M., Gisario, A., Nematollahi, M., Rahimzadeh, A., Baghbaderani, K. S. & Elahinia, M.https://doi.org/10.1016/j.mtcomm.2021.102022Integration of an In-Situ Consolidation Mechanism into the Fused Deposition Modeling Process for Low Porosity Continuous Fiber-Reinforced Thermoplastic Structures (2021)[Thesis › EngD Thesis]. University of Twente. Willemstein, N.https://www.persistent-identifier.nl/urn:nbn:nl:ui:28-45e835fe-eb72-4418-8ab8-ea3d35748a54Design method for cost-effectively realizing high variety products (2021)Procedia CIRP, 96, 139-144. Torn, R.-J. & Vaneker, T. H. J.https://doi.org/10.1016/j.procir.2021.01.0664D printing of shape memory polylactic acid (PLA) components: Investigating the role of the operational parameters in fused deposition modelling (FDM) (2021)Journal of Manufacturing Processes, 61, 473-480. Barletta, M., Gisario, A. & Mehrpouya, M.https://doi.org/10.1016/j.jmapro.2020.11.036Demand-Aware Electricity Price Prediction Based on LSTM and Wavelet Transform (2021)In EU PVSEC 2023 (pp. 1668-1671) (38th European Photovoltaic Solar Energy Conference and Exhibition; 1668-1670). Iwabuchi, K., Kato, K., Watari, D., Taniguchi, I., Catthoor, F., Shirazi, E. & Onoye, T.https://doi.org/10.4229/EUPVSEC20212021-7DV.1.4Improving the Construction of RCA+ contradiction Trees (2021)In Creative Solutions for a Sustainable Development - 21st International TRIZ Future Conference, TFC 2021, Proceedings (pp. 209-219) (IFIP Advances in Information and Communication Technology; Vol. 635 IFIP). Springer. Vaneker, T. H. J. & Laoh, S.https://doi.org/10.1007/978-3-030-86614-3_17Laser welding of nickel-titanium (NiTi) shape memory alloys (2021)In Advanced Welding and Deforming (pp. 203-230) (Handbooks in Advanced Manufacturing). Elsevier Doyma. Mehrpouya, M., Gisario, A., Lavvafi, H., Dehghanghadikolaei, A. & Darafsheh, A.https://doi.org/10.1016/B978-0-12-822049-8.00008-6The benefits of additive manufacturing for sustainable design and production (2021)In Sustainable Manufacturing (pp. 29-59) (Handbooks in Advanced Manufacturing). Elsevier Doyma. Mehrpouya, M., Vosooghnia, A., Dehghanghadikolaei, A. & Fotovvati, B.https://doi.org/10.1016/B978-0-12-818115-7.00009-2
2020
Investigation on shape recovery of 3D printed honeycomb sandwich structure (2020)Polymers for advanced technologies, 31(12), 3361-3365. Mehrpouya, M., Gisario, A., Azizi, A. & Barletta, M.https://doi.org/10.1002/pat.5020Towards an innovative lubricant condition monitoring strategy for maintenance of ageing multi-unit systems. (2020)Reliability engineering & system safety, 204. Article 107200. Wakiru, J., Pintelon, L., Muchiri, P. N., Chemweno, P. K. & Mburu, S.https://doi.org/10.1016/j.ress.2020.107200A comparative risk assessment of dialysis care processes in the home and hospital care contexts (2020)International Journal of Systems Assurance Engineering and Management, 11(5), 985-1002. Chemweno, P. & Pintelon, L.https://doi.org/10.1007/s13198-020-01032-4Pulsed mode selective laser melting of porous structures: Structural and thermophysical characterization (2020)Additive manufacturing, 35. Article 101263. Jafari, D., Wits, W. W., Vaneker, T. H. J., Demir, A. G., Previtali, B., Geurts, B. J. & Gibson, I.https://doi.org/10.1016/j.addma.2020.101263Orienting safety assurance with outcomes of hazard analysis and risk assessment: A review of the ISO 15066 standard for collaborative robot systems (2020)Safety science, 129. Article 104832. Chemweno, P., Pintelon, L. & Decre, W.https://doi.org/10.1016/j.ssci.2020.104832Investigation on the Functionality of Thermoresponsive Origami Structures (2020)Advanced engineering materials, 22(8). Article 2000296. Mehrpouya, M., Azizi, A., Janbaz, S. & Gisario, A.https://doi.org/10.1002/adem.202000296Sustainable and resilient smart house using the internal combustion engine of plug-in hybrid electric vehicles (2020)Sustainability (Switzerland), 12(15). Article 6046. Abessi, A., Shirazi, E., Jadid, S. & Shafie-Khah, M.https://doi.org/10.3390/su12156046Porous materials additively manufactured at low energy: Single-layer manufacturing and characterization (2020)Materials & Design, 191. Article 108654. Jafari, D., van Alphen, K. J. H., Geurts, B. J., Wits, W. W., Cordova, L., Vaneker, T. H. J., Ur Rahman, N., Römer, G.-W. R. B. E. & Gibson, I.https://doi.org/10.1016/j.matdes.2020.108654Investigation on the functionality of laser-welded NiTi to NiTiCu shape memory wires (2020)Journal of intelligent material systems and structures, 31(9), 1171-1175. Mehrpouya, M., Gisario, A., Barletta, M. & Veniali, F.https://doi.org/10.1177/1045389X20914401Design of a robotized welding cell for sheet metal products assembling in a single-piece flow process configuration (2020)[Thesis › EngD Thesis]. University of Twente. Rios Vargas, L.Phase change heat transfer characteristics of an additively manufactured wick for heat pipe applications (2020)Applied thermal engineering, 168. Article 114890. Jafari, D., Wits, W. W. & Geurts, B. J.https://doi.org/10.1016/j.applthermaleng.2019.114890The glass swing: a vector active structure made of glass struts and 3D-printed steel nodes (2020)Glass Structures and Engineering, 5(1), 99-116. Snijder, A. H., van der Linden, L. P. L., Goulas, C., Louter, C. & Nijsse, R.https://doi.org/10.1007/s40940-019-00110-9Failure mechanisms of mechanically and thermally produced holes in high-strength low-alloy steel plates subjected to fatigue loading (2020)Metals, 10(3). Article 318. Jiménez-Peña, C., Goulas, C., Preußner, J. & Debruyne, D.https://doi.org/10.3390/met10030318Improving the friction stir welding tool life for joining the metal matrix composites (2020)International journal of advanced manufacturing technology, 106(7-8), 3217-3227. Emamian, S. S., Awang, M., Yusof, F., Sheikholeslam, M. & Mehrpouya, M.https://doi.org/10.1007/s00170-019-04837-1A data mining approach for lubricant-based fault diagnosis (2020)Journal of quality in maintenance engineering, 27(2), 264-291. Wakiru, J., Pintelon, L., Muchiri, P. & Chemweno, P.https://doi.org/10.1108/JQME-03-2018-0027Design for additive manufacturing: Framework and methodology (2020)CIRP annals : manufacturing technology, 69(2), 578-599. Vaneker, T., Bernard, A., Moroni, G., Gibson, I. & Zhang, Y.https://doi.org/10.1016/j.cirp.2020.05.006Nanocomposite biomaterials made by 3D printing: Achievements and challenges (2020)In Handbook of Polymer Nanocomposites for Industrial Applications (pp. 675-685). Elsevier Doyma. Zarrintaj, P., Vahabi, H., Gutiérrez, T. J., Mehrpouya, M., Ganjali, M. R. & Saeb, M. R.https://doi.org/10.1016/B978-0-12-821497-8.00025-3Prediction model for determining the optimum operational parameters in laser forming of fiber-reinforced composites (2020)Advances in Manufacturing, 8(2), 242–251. Gisario, A., Mehrpouya, M., Rahimzadeh, A., De Bartolomeis, A. & Barletta, M.https://doi.org/10.1007/s40436-020-00304-3Simulation-based derived maintenance spares criticality assessment (2020)In 30th European Safety and Reliability Conference, ESREL 2020 and 15th Probabilistic Safety Assessment and Management Conference, PSAM 2020 (pp. 4516-4523). Research Publishing Services. Wakiru, J., Pintelon, L., Muchiri, P. & Chemweno, P.https://www.rpsonline.com.sg/proceedings/esrel2020/html/4618.xml
2019
A prediction model for finding the optimal laser parameters in additive manufacturing of NiTi shape memory alloy (2019)International journal of advanced manufacturing technology, 105, 4691–4699. Mehrpouya, M., Gisario, A., Rahimzadeh, A., Nematollahi, M., Baghbaderani, K. S. & Elahinia, M.https://doi.org/10.1007/s00170-019-04596-zAutonomous Self-Healing in Smart Distribution Grids Using agent Systems (2019)IEEE transactions on industrial informatics, 15(12), 6291-6301. Article 8590725. Shirazi, E. & Jadid, S.https://doi.org/10.1109/TII.2018.2889741A cost-based failure prioritization approach for selecting maintenance strategies for thermal power plants: a case study context of developing countries (2019)International Journal of Systems Assurance Engineering and Management, 10(5), 1369-1387. Wakiru, J., Muchiri, P. N., Pintelon, L. & Chemweno, P.https://doi.org/10.1007/s13198-019-00864-zMetal additive manufacturing in the commercial aviation industry: A review (2019)Journal of manufacturing systems, 53, 124-149. Gisario, A., Kazarian, M., Martina, F. & Mehrpouya, M.https://doi.org/10.1016/j.jmsy.2019.08.005Numerical study for prediction of optimum operational parameters in laser welding of NiTi alloy (2019)Optics & Laser Technology, 118, 159-169. Mehrpouya, M., Gisario, A., Huang, H., Rahimzadeh, A. & Elahinia, M.https://doi.org/10.1016/j.optlastec.2019.05.010The Potential of Additive Manufacturing in the Smart Factory Industrial 4.0: A Review (2019)Applied Sciences. Article 3865. Mehrpouya, M., Dehghanghadikolaei, A., Fotovvati, B., Vosooghnia, A., Emamian, S. S. & Gisario, A.https://doi.org/10.3390/app9183865Influence of hole-making procedures on fatigue behaviour of high strength steel plates (2019)Journal of Constructional Steel Research, 158, 1-14. Jiménez-Peña, C., Goulas, C., Rossi, B. & Debruyne, D.https://doi.org/10.1016/j.jcsr.2019.03.005Design of high-strength and damage-resistant carbide-free fine bainitic steels for railway crossing applications (2019)Materials Science & Engineering A, 759, 210-223. Kumar, A., Makineni, S. K., Dutta, A., Goulas, C., Steenbergen, M., Petrov, R. H. & Sietsma, J.https://doi.org/10.1016/j.msea.2019.05.043Robust switching control for service restoration in smart grids considering switching malfunction by MAS (2019)IET Generation, Transmission and Distribution, 13(12), 2372-2381. Shirazi, E. & Jadid, S.https://doi.org/10.1049/iet-gtd.2018.6774Dissimilar Laser Welding of NiTi Wires (2019)Lasers in Manufacturing and Materials Processing, 6(2), 99–112. Mehrpouya, M., Gisario, A., Barletta, M., Natali, S. & Veniali, F.https://doi.org/10.1007/s40516-019-00084-0A multiagent design for self-healing in electric power distribution systems (2019)Electric power systems research, 171, 230-239. Shirazi, E. & Jadid, S.https://doi.org/10.1016/j.epsr.2019.02.025Atomic-scale investigations of isothermally formed bainite microstructures in 51CrV4 spring steel (2019)Materials characterization, 152, 67-75. Goulas, C., Kumar, A., Mecozzi, M. G., Castro-Cerda, F. M., Herbig, M., Petrov, R. H. & Sietsma, J.https://doi.org/10.1016/j.matchar.2019.03.038CAM planning for multi-axis laser additive manufacturing considering collisions (2019)CIRP annals : manufacturing technology, 68(1), 447-450. Plakhotnik, D., Glasmacher, L., Vaneker, T., Smetanin, Y., Stautner, M., Murtezaoglu, Y. & van Houten, F.https://doi.org/10.1016/j.cirp.2019.04.007Droplet impact on 3D-printed porous structures: experimental investigation on the effect of porosity (2019)[Contribution to conference › Abstract] International Conference on Smart Science 2019. Jafari, D., Wits, W. W., Vaneker, T. H. J. & Geurts, B. J.A review on lubricant condition monitoring information analysis for maintenance decision support (2019)Mechanical systems and signal processing, 118, 108-132. Wakiru, J. M., Pintelon, L., Muchiri, P. N. & Chemweno, P. K.https://doi.org/10.1016/j.ymssp.2018.08.039LaserOrigami (LO) of three-dimensional (3D) components: Experimental analysis and numerical modeling-part II (2019)Journal of Manufacturing Processes, 39, 192-199. Mehrpouya, M., Huang, H., Venettacci, S. & Gisario, A.https://doi.org/10.1016/j.jmapro.2019.02.026A simulation-based optimization approach evaluating maintenance and spare parts demand interaction effects (2019)International journal of production economics, 208(February), 329-342. Wakiru, J. M., Pintelon, L., Muchiri, P. N. & Chemweno, P. K.https://doi.org/10.1016/j.ijpe.2018.12.014An artificial neural network model for laser transmission welding of biodegradable polyethylene terephthalate/polyethylene vinyl acetate (PET/PEVA) blends (2019)International journal of advanced manufacturing technology, 102, 1497–1507. Mehrpouya, M., Gisario, A., Rahimzadeh, A. & Barletta, M.https://doi.org/10.1007/s00170-018-03259-9Effect of welding parameters on functionality of dissimilar laser-welded NiTi superelastic (SE) to shape memory effect (SME) wires (2019)International journal of advanced manufacturing technology, 103(1-4), 1593–1601. Mehrpouya, M., Gisario, A., Broggiato, G. B., Puopolo, M., Vesco, S. & Barletta, M.https://doi.org/10.1007/s00170-019-03514-7Functional, Technical and Economical Requirements Integration for Additive Manufacturing Design Education (2019)In Additive Manufacturing – Developments in Training and Education (pp. 171-185). Springer. Bernard, A., Thompson, M. K., Moroni, G., Vaneker, T., Pei, E. & Barlier, C.https://doi.org/10.1007/978-3-319-76084-1_12Maintenance objective selection framework applicable to designing and improving maintenance programs (2019)International Journal of Engineering Research in Africa, 43, 127-144. Wakiru, J., Pintelon, L., Muchiri, P. & Chemweno, P.https://doi.org/10.4028/www.scientific.net/JERA.43.127Mass Personalization with Industry 4.0 by SMEs: a concept for collaborative networks (2019)Procedia manufacturing, 28, 135-141. Torn, I. A. R. & Vaneker, T. H. J.https://doi.org/10.1016/j.promfg.2018.12.022Welding strength of dissimilar laser-welded NiTi and NiTiCu shape memory wires (2019)Manufacturing Letters, 22, 25-27. Mehrpouya, M., Gisario, A., Barletta, M. & Broggiato, G. B.https://doi.org/10.1016/j.mfglet.2019.10.003‘Flash’ Annealing in a Cold-Rolled Low Carbon Steel Alloyed With Cr, Mn, Mo, and Nb: Part I - Continuous Phase Transformations (2019)Steel research international, 90(1). Article 1800098. Castro Cerda, F. M., Vercruysse, F., Goulas, C., Schulz, B. & Petrov, R. H.https://doi.org/10.1002/srin.201800098
2018
Experimental Performance of a 3D-Printed Hybrid Heat Pipe-Thermosyphon for Cooling of Power Electronics (2018)In THERMINIC 2018 - 24th International Workshop on Thermal Investigations of ICs and Systems, Proceedings. Article 8593314. IEEE. Wits, W. W. & Jafari, D.https://doi.org/10.1109/THERMINIC.2018.8593314Freeform-Optimized Shapes for Natural-Convection Cooling (2018)In THERMINIC 2018 - 24th International Workshop on Thermal Investigations of ICs and Systems, Proceedings. Article 8593305. IEEE. Wits, W. W., Jafari, D., Jeggels, Y., Van De Velde, S., Jeggels, D. & Engelberts, N.https://doi.org/10.1109/THERMINIC.2018.8593305Laser welding of NiTi shape memory sheets using a diode laser (2018)Optics & Laser Technology, 31, 142-149. Mehrpouya, M., Gisario, A., Brotzu, A. & Natali, S.https://doi.org/10.1016/j.optlastec.2018.06.038Printing of complex free-standing microstructures via laser-induced forward transfer (LIFT) of pure metal thin films (2018)Additive manufacturing, 24, 391-399. Feinaeugle, M., Pohl, R., Bor, T., Vaneker, T. & Römer, G.-W.https://doi.org/10.1016/j.addma.2018.09.028Identifying the causes of human error in maintenance work in developing countries (2018)International journal of industrial ergonomics, 68, 222-230. Morag, I., Chemweno, P., Pintelon, L. & Sheikhalishahi, M.https://doi.org/10.1016/j.ergon.2018.08.014A risk-based maintenance approach for critical care medical devices: A case study application for a large hospital in a developing country (2018)International Journal of Systems Assurance Engineering and Management, 9(5), 1217-1233. Vala, S., Chemweno, P., Pintelon, L. & Muchiri, P.https://doi.org/10.1007/s13198-018-0705-1Improving productivity and worker conditions in assembly: Part 2 - Rapid deployment of learnable robot skills (2018)[Contribution to conference › Paper] 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2018. Vergara, C., Van de Perre, G., El Makrini, I., Van Acker, B. B., Saldien, J., Pintelon, L., Chemweno, P., Weuts, R., Moons, K., Burggraeve, S., Vanderborght, B., Aertbeliën, E. & Decré, W.Improving productivity and worker conditions in assembly: Part 1 - A collaborative architecture and task allocation (2018)[Contribution to conference › Paper] 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2018. Van de Perre, G., El Makrini, I., Van Acker, B. B., Saldien, J., Vergara, C., Pintelon, L., Chemweno, P., Weuts, R., Moons, K., Dewil, R., Cattrysse, D., Burggraeve, S., Mateus, J. C., Decré, W., Aertbeliën, E. & Vanderborght, B.Metal 3D-printed wick structures for heat pipe application: Capillary performance analysis (2018)Applied thermal engineering, 143, 403-414. Jafari, D., Wits, W. W. & Geurts, B. J.https://doi.org/10.1016/j.applthermaleng.2018.07.111The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review (2018)Renewable & sustainable energy reviews, 91, 420-442. Jafari, D. & Wits, W. W.https://doi.org/10.1016/j.rser.2018.03.109Performance evaluation of an additively manufactured freeform wick for heat pipe applications (2018)In 19th International Heat Pipe Conference and 13th international heat pipe symphosium (IHPC-IHPS 2018). Jafari, D., Wits, W. W. & Geurts, B. J.Risk assessment methodologies in maintenance decision making: A review of dependability modelling approaches (2018)Reliability engineering & system safety, 173, 64-77. Chemweno, P., Pintelon, L., Muchiri, P. N. & Van Horenbeek, A.https://doi.org/10.1016/j.ress.2018.01.011Experimental and numerical study of natural ventilation in four-sided wind tower traps (2018)Energy Equipment and Systems, 6(2), 167-179. Jafari, D., Shateri, A. & Ahmadi Nadooshan, A.https://doi.org/10.22059/EES.2018.31535Geometry-Based Process Planning For Multi-Axis Support-Free Additive Manufacturing (2018)Procedia CIRP, 78s, 73-78. Murtezaoglu, Y., Plakhotnik, D., Stautner, M., Vaneker, T. & van Houten, F. J. A. M.https://doi.org/10.1016/j.procir.2018.08.175Influence of maintenance and operations strategies on the availability of critical power plant equipment: A simulation approach (2018)[Contribution to conference › Paper] 20th International Working Seminar on Production Economics 2018. Wakiru, J. M., Pintelon, L., Chemweno, P. & Muchiri, P.Laser welding of NiTi shape memory alloy: A review (2018)Journal of Manufacturing Processes, 31, 162-186. Mehrpouya, M., Gisario, A. & Elahinia, M.https://doi.org/10.1016/j.jmapro.2017.11.011Maintenance optimization: Application of remanufacturing and repair strategies (2018)Procedia CIRP, 69, 899-904. Wakiru, J., Pintelon, L., Muchiri, P. N. & Chemweno, P.https://doi.org/10.1016/j.procir.2017.11.008Materiaal aangroeitechnieken (2018)In Industriële productie. Uitgeverij Boom. Kals, H. J. J., Buiting-Csikos, C., Dewulf, W., Lauwers, B., Ponsen, J. M., Streppel, A. H. & Vaneker, T. H. J.
2017
An investigation of porous structure characteristics of heat pipes made by additive manufacturing (2017)In THERMINIC 2017 - 23rd International Workshop on Thermal Investigations of ICs and Systems (pp. 1-7). IEEE. Jafari, D., Wits, W. W. & Geurts, B. J.https://doi.org/10.1109/THERMINIC.2017.8233841An experimental investigation on the evaporation and condensation heat transfer of two-phase closed thermosyphons (2017)Experimental thermal and fluid science, 88, 111-123. Jafari, D., Di Marco, P., Filippeschi, S. & Franco, A.https://doi.org/10.1016/j.expthermflusci.2017.05.019An investigation on the optimum machinability of NiTi based shape memory alloy (2017)Materials and manufacturing processes, 32(13), 1497-1504. Mehrpouya, M., Shahedin, A. M., Dawood, S. D. S. & Ariffin, A. K.https://doi.org/10.1080/10426914.2017.1279290The Effect of Heating Rate on the Microstructure of a Soft-Annealed Medium Carbon Steel (2017)Steel research international, 88(10). Article 1700158. Papaefthymiou, S., Goulas, C., Castro Cerda, F. M., Geerlofs, N. & Petrov, R.https://doi.org/10.1002/srin.201700158An investigation of porous structure characteristics of heat pipes made by additive manufacturing (2017)[Contribution to conference › Poster] 23rd International Workshop on Thermal Investigations of ICs and Systems, THERMINIC 2017. Jafari, D., Wits, W. W. & Geurts, B. J.The effect of the pre-heating stage on the microstructure and texture of a cold rolled FeCMnAlSi steel under conventional and ultrafast heating (2017)Materials characterization, 130, 188-197. Castro Cerda, F. M., Goulas, C., Sabirov, I., Kestens, L. A. I. & Petrov, R. H.https://doi.org/10.1016/j.matchar.2017.06.010An experimental investigation and optimization of screen mesh heat pipes for low-mid temperature applications (2017)Experimental thermal and fluid science, 84, 120-133. Jafari, D., Shamsi, H., Filippeschi, S., Di Marco, P. & Franco, A.https://doi.org/10.1016/j.expthermflusci.2017.02.005Cost reduction and peak shaving through domestic load shifting and DERs (2017)Energy, 124, 146-159. Shirazi, E. & Jadid, S.https://doi.org/10.1016/j.energy.2017.01.148Austenite formation in 0.2% C and 0.45% C steels under conventional and ultrafast heating (2017)Materials & Design, 116, 448-460. Castro Cerda, F. M., Sabirov, I., Goulas, C., Sietsma, J., Monsalve, A. & Petrov, R. H.https://doi.org/10.1016/j.matdes.2016.12.009Fatigue Fracture of a High-Resistance Structural Steel Component Destined to Sustain Severe Loads Under Service Conditions (2017)Journal of Failure Analysis and Prevention, 17(1), 79-85. Papaefthymiou, S., Vazdirvanidis, A., Pantazopoulos, G. & Goulas, C.https://doi.org/10.1007/s11668-016-0216-9A review of friction stir welding pin profile (2017)In 2nd International Conference on Mechanical, Manufacturing and Process Plant Engineering (pp. 1-18) (Lecture Notes in Mechanical Engineering). Springer. Emamian, S., Awang, M., Yusof, F., Hussain, P., Mehrpouya, M., Kakooei, S., Moayedfar, M. & Zafar, A.https://doi.org/10.1007/978-981-10-4232-4_1Dissimilar joining of transparent Poly(ethylene terephthalate) to aluminum 7075 sheets using a diode laser (2017)Journal of laser applications, 29. Article 022418. Gisario, A., Mehrpouya, M. & Pizzi, E.https://doi.org/10.2351/1.4983268Enhancing thermal management applications through porous structures fabricated by selective laser melting (2017)[Contribution to conference › Poster] The Enlighten Conference - Metal Powder-based Additive Manufacturing 2017. Jafari, D. & Wits, W. W.Laser-assisted bending of Titanium Grade-2 sheets: Experimental analysis and numerical simulation (2017)Optics and Lasers in Engineering, 92, 110-119. Gisario, A., Mehrpouya, M., Venettacci, S. & Barletta, M.https://doi.org/10.1016/j.optlaseng.2016.09.004Material Extrusion of Continuous Fiber Reinforced Plastics Using Commingled Yarn (2017)Procedia CIRP, 66, 317-322. Vaneker, T. H. J.https://doi.org/10.1016/j.procir.2017.03.367Microstructural Characterization and Mechanical Reliability of Laser-Machined Structures (2017)In Advances in Laser Materials Processing: Technology, Research and Applications (pp. 731-761). Elsevier Doyma. Mehrpouya, M., Lavvafi, H. & Darafsheh, A.https://doi.org/10.1016/B978-0-08-101252-9.00025-XRecent advantages in laser fabrication of micro-channel heat exchangers: Fortschritte in der Herstellung von Mikrokanal Wärmetauschern mittels Laserherstellung (2017)Materialwissenschaft und Werkstofftechnik, 48(3-4), 205-209. Mehrpouya, M. & Emamian, S.https://doi.org/10.1002/mawe.201600759The Role of Design for Additive Manufacturing in the Successful Economical Introduction of AM (2017)Procedia CIRP, 60, 181-186. Vaneker, T. H. J.https://doi.org/10.1016/j.procir.2017.02.012Unsteady experimental and numerical analysis of a two-phase closed thermosyphon at different filling ratios (2017)Experimental thermal and fluid science, 81, 164-174. Jafari, D., Filippeschi, S., Franco, A. & Di Marco, P.https://doi.org/10.1016/j.expthermflusci.2016.10.022
2016
Design Support for Maintenance Tasks using TRIZ (2016)Procedia CIRP, 39, 67-72. Vaneker, T. H. J. & van Diepen, T.https://doi.org/10.1016/j.procir.2016.01.167Design of a decentralized modular architecture for flexible and extensible production systems (2016)Mechatronics, 34, 160-169. Essers, M. S. & Vaneker, T. H. J.https://doi.org/10.1016/j.mechatronics.2015.08.009Microstructure, texture and mechanical properties in a low carbon steel after ultrafast heating (2016)Materials Science & Engineering A, 672, 108-120. Cerda, F. C., Goulas, C., Sabirov, I., Papaefthymiou, S., Monsalve, A. & Petrov, R. H.https://doi.org/10.1016/j.msea.2016.06.056Bainite Formation in Medium-Carbon Low-Silicon Spring Steels Accounting for Chemical Segregation (2016)Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47(6), 3077-3087. Goulas, C., Mecozzi, M. G. & Sietsma, J.https://doi.org/10.1007/s11661-016-3418-6Design of a novel, hybrid decentralized, distributed, modular architecture for manufacturing systems (2016)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Essers, M. S.https://doi.org/10.3990/1.9789036540674Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints (2016)CIRP annals : manufacturing technology, 65(2), 737-760. Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B. & Martina, F.https://doi.org/10.1016/j.cirp.2016.05.004LaserOrigami (LO) of three-dimensional (3D) components: Experimental analysis and numerical modelling (2016)Journal of Manufacturing Processes, 23, 242-248. Gisario, A., Mehrpouya, M., Venettacci, S., Mohammadzadeh, A. & Barletta, M.https://doi.org/10.1016/j.jmapro.2016.05.005MEMS applications of NiTi based shape memory alloys: A review (2016)Micro and Nanosystems, 8(2), 79 - 91. Mehrpouya, M. & Bidsorkhi, H. C.https://doi.org/10.2174/1876402908666161102151453Porosity testing methods for the quality assessment of selective laser melted parts (2016)CIRP annals : manufacturing technology, 65(1), 201-204. Wits, W. W., Carmignato, S., Zanini, F. & Vaneker, T. H. J.https://doi.org/10.1016/j.cirp.2016.04.054Structured Innovation with TRIZ in Science and Industry - Creating Value for Customers and Society (2016)Procedia CIRP, 39, 1-2. Belski, I., Livotov, P. & Vaneker, T. H. J.https://doi.org/10.1016/j.procir.2016.01.033Two-phase closed thermosyphons: A review of studies and solar applications (2016)Renewable & sustainable energy reviews, 53, 575-593. Jafari, D., Franco, A., Filippeschi, S. & Di Marco, P.https://doi.org/10.1016/j.rser.2015.09.002
2015
Optimal joint scheduling of electrical and thermal appliances in a smart home environment (2015)Energy conversion and management, 106, 181-193. Shirazi, E., Zakariazadeh, A. & Jadid, S.https://doi.org/10.1016/j.enconman.2015.09.017Optimal residential appliance scheduling under dynamic pricing scheme via HEMDAS (2015)Energy and buildings, 93, 40-49. Shirazi, E. & Jadid, S.https://doi.org/10.1016/j.enbuild.2015.01.061Study on the evolution mechanism of oxidation and copper diffusion and precipitation phenomena and their effect on the surface quality of steel plates (2015)International Journal of Structural Integrity, 6(2), 214-224. Papaefthymiou, S., Goulas, C. & Panteleakou, V.https://doi.org/10.1108/IJSI-08-2013-0018Micro-friction stir welding of titan zinc sheets (2015)Journal of materials processing technology, 216, 133-139. Papaefthymiou, S., Goulas, C. & Gavalas, E.https://doi.org/10.1016/j.jmatprotec.2014.08.029Design and experimental analysis of a screened heat pipe for solar applications (2015)Journal of physics: Conference series, 655. Article 012022. Jafari, D., Filippeschi, S., Franco, A. & Di Marco, P.https://doi.org/10.1088/1742-6596/655/1/012022Introducing Trimming and Function Ranking to SolidWorks based on Function Analysis (2015)Procedia engineering, 131, 184-193. Chechurin, L. S., Wits, W. W., Bakker, H. M. & Vaneker, T. H. J.https://doi.org/10.1016/j.proeng.2015.12.370Investigation of bainite formation in a chemically inhomogeneous medium carbon steel (2015)In PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (pp. 71-72). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Goulas, C., Mecozzi, M. G. & Sietsma, J.Microstructural evolution during ultrafast heat treament of medium carbon steels (2015)In PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (pp. 569-570). International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. Papaefthymiou, S., Goulas, C., Cerda, F. C., Sietsma, J. & Petrov, R.Numerical analysis of the effect of filling ratio on the transient behaviour of a two-phase closed thermosyphon (2015)In Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering, MCM 2015 (Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering). Avestia Publishing. Jafari, D., Filippeschi, S., Franco, A. & Di Marco, P.TRIZ and knowledge-based innovation in science and industry (2015)Procedia engineering, 131, 1-2. Cavallucci, D., Cascini, G., Duflou, J., Livotov, P. & Vaneker, T.https://doi.org/10.1016/j.proeng.2015.12.341TRIZ as an enabler for intellectual property protection during product development (2015)Procedia engineering, 131, 731-736. Vaneker, T. H. J., Damgrave, R. G. J. & Kuster, J. G.https://doi.org/10.1016/j.proeng.2015.12.364
2014
Evaluating a Data Distribution Service System for Dynamic Manufacturing Environments: A Case Study (2014)Procedia technology, 15, 622-631. Essers, M. S. & Vaneker, T. H. J.https://doi.org/10.1016/j.protcy.2014.09.023Evaluating a Prototype Approach to Validating a DDS-based System Architecture for Automated Manufacturing Environments (2014)Procedia CIRP, 25, 385-392. Essers, M. S. & Vaneker, T. H. J.https://doi.org/10.1016/j.procir.2014.10.053Mixing enhancement in a passive micromixer with convergent–divergent sinusoidal microchannels and different ratio of amplitude to wave length (2014)Computers and fluids, 105, 82-90. Jafari, D., Khosravi Parsa, M. & Hormozi, F.https://doi.org/10.1016/j.compfluid.2014.09.024Review of the Machining Difficulties of Nickel-Titanium Based Shape Memory Alloys (2014)In Applied Mechanics and Materials (pp. 533-537) (Applied Mechanics and Materials; Vol. 564). Scientific.net. Hassan, M. R., Mehrpouya, M. & Dawood, S.https://doi.org/10.4028/www.scientific.net/AMM.564.533Theoretical analysis of screened heat pipes for medium and high temperature solar applications (2014)Journal of physics: Conference series, 547. Article 012010. Di Marco, P., Filippeschi, S., Franco, A. & Jafari, D.https://doi.org/10.1088/1742-6596/547/1/012010
2013
TRIZ as an enabler for intellectual property protection during product development (2013)In TRIZ future conference 2013: proceedings of the 13th ETRIA world TRIZ future conference 2013 (pp. -). Vaneker, T. H. J., Damgrave, R. G. J. & Kuster, J.A decade of TRIZ research at ETRIA conferences (2013)In Extenics and innovation methods - Proceedings of the International Symposium on Extenics and Innovation Methods; Beijing, China; 16 August 2013 through 18 August 2013 (pp. -). CRC Press (Taylor & Francis). Vaneker, T. H. J.Developing concepts for improved efficiency of robot work preparation (2013)Procedia CIRP, 7, 515-520. Essers, M. S. & Vaneker, T. H. J.https://doi.org/10.1016/j.procir.2013.06.025Modelling of the machining process of a nickel-titanium based shape memory alloy (2013)[Book/Report › Report]. GRIN Verlag. Mehrpouya, M.https://www.grin.com/document/346768New Strategies for Powder Compaction in Powder-based Rapid Prototyping Techniques (2013)Procedia CIRP, 6, 527-532. Budding, A. & Vaneker, T. H. J.https://doi.org/10.1016/j.procir.2013.03.100Open Source Powder based Rapid Prototyping Machine for Ceramics (2013)Procedia CIRP, 6, 533-538. Budding, A., Vaneker, T. H. J. & Winnubst, A. J. A.https://doi.org/10.1016/j.procir.2013.03.101Review of self-healing effect on Shape Memory Alloy (SMA) Structures (2013)Advanced materials research, 701, 87-92. Hassan, M. R., Mehrpouya, M., Emamian, S. S. & Sheikholeslam, M. N.https://doi.org/10.4028/www.scientific.net/AMR.701.87Review of the Effects of Friction Stir Welding Speed on Stainless Steel Type 304L (2013)International Journal of Materials, Mechanics and Manufacturing, 1(1), 85-87. Sulaiman, S., Emamian, S. S., Sheikholeslam, M. N. & Mehrpouya, M.https://doi.org/10.7763/IJMMM.2013.V1.18
2012
A function based approach for designing intelligent flexible automated manufacturing environments (2012)Procedia CIRP, 3, 263-268. Essers, M. S. & Vaneker, T. H. J.https://doi.org/10.1016/j.procir.2012.07.046
2011
Development of a framework for using TRIZ in a co-disciplinary design environment (2011)Procedia engineering, 9, 379-390. de Vries, R. W., Vaneker, T. H. J. & Souchkov, V.https://doi.org/10.1016/j.proeng.2011.03.127Proceedings of the ETRIA World TRIZ Future Conferences (2011)[Book/Report › Book editing]. Elsevier. Cavallucci, D., Vaneker, T. H. J., Cascini, G. & Duflou,, J. R.Rapid Protyotying: productieproces van de toekomst (2011)Product, 19, 8-11. Vaneker, T. H. J.Towards more visible scientific findings in TRIZ communities through ETRIA (2011)Procedia engineering, 9, 1-2. Cavallucci, D., Vaneker, T., Cascini, G. & Duflou, J.https://doi.org/10.1016/j.proeng.2011.04.001TRIZ based interface conflict resolving strategies for modular product architectures (2011)Procedia engineering, 9, 30-39. Wits, W. W. & Vaneker, T. H. J.https://doi.org/10.1016/j.proeng.2011.03.098
2010
Full immersion TRIZ in education (2010)In Proceedings of the TRIZ Conference (pp. 269-276). Bergamo University Press. Wits, W. W., Vaneker, T. H. J., Souchkov, V. & Souchkov, V.TRIZ based Interface conflict resolving strategies for modular product architectures (2010)In Proceedings of the TRIZ Future Conference (pp. 37-42). Bergamo University Press. Wits, W. W. & Vaneker, T. H. J.Integrated design and manufacturing of flat miniature heat pipes using printed circuit board technology (2010)IEEE transactions on components and packaging technologies, 33(2), 398-408. Wits, W. W. & Vaneker, T. H. J.
2009
CAD implementation of design rules for aluminium extrusion dies (2009)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. van Ouwerkerk, G.https://doi.org/10.3990/1.9789036528146Novel cooling strategy for electronic packages: directly injected cooling (2009)CIRP journal of manufacturing science and technology, 1(3), 142-147. Wits, W. W., Vaneker, T. H. J., Mannak, J. H. & Legtenberg, R.https://doi.org/10.1016/j.cirpj.2008.10.001
2008
Integrated cooling concepts for printed circuit boards (2008)[Thesis › PhD Thesis - Research UT, graduation UT]. University of Twente. Wits, W. W.https://doi.org/10.3990/1.9789036527316Development of a framework for using TRIZ in a co-disciplinary design environment (2008)In TRIZ-Future Conference '08 Synthesis of innovation (pp. 49-56). University of Twente. de Vries, R. W., Vaneker, T. H. J. & Souchkov, V.TRIZ-Future Conference '08 Synthesis of innovation (2008)[Book/Report › Book editing]. University of Twente. Vaneker, T. H. J. & Lutters, D.Die Design and Manufacturability Formalization Using the Medal Axis Transform (2008)In Proceedings of the Ninth International Aluminum Extrusion Technology Seminar: May 13-16, 2008, Orlando, Florida. Extrusion Technology for Aluminum Profiles Foundation. van Ouwerkerk, G., Vaneker, T. H. J., van Houten, F. J. A. M., Nilsen, K. E. & Koenis, P. T. G.Integrated bottom up and top down approach to optimization of the extrusion process (2008)CIRP annals : manufacturing technology, 57(1), 183-186. Vaneker, T. H. J., van Ouwerkerk, G., Nilsen, K. E., Koenis, P. T. G. & van Houten, F. J. A. M.https://doi.org/10.1016/j.cirp.2008.03.075
2007
Development of a software module for functionality-driven manufacturability optimisations for sink-ins in extrusion dies (2007)In Proceedings Aluminium Two Thousand World Congress 2007: Florence, Italy, 13-17 March 2007. van Ouwerkerk, G., Sluiter, E. J., Vaneker, T. H. J. & van Houten, F. J. A. M.Human Centered Product Data Exchange in Manufacturing Environments (2007)In International Conference on Competitive Manufacturing COMA '07 (pp. 493-498). Stellenbosch University. Vaneker, T. H. J., Lutters, D. & van Houten, F. J. A. M.Domain Integration and Cost Reduction in Electronic Product Design: a case study (2007)[Contribution to conference › Paper] 40th CIRP International Seminar on Manufacturing Systems 2007. Wits, W. W., Vaneker, T. H. J., Mannak, J. & van Houten, F. J. A. M.
2006
A CAD module for automatically generating complex sink-in shapes for aluminium extrusion dies (2006)In Proceedings of the 39st CIRP International Seminar on Manufacturing Systems: The Morphology of Innovative Manufacturing Systems (pp. 537-544). University of Ljubljana. van Ouwerkerk, G., Vaneker, T. H. J. & van Houten, F. J. A. M.What-if design as a synthesizing working method in product design (2006)CIRP annals : manufacturing technology, 55(2), 131-134. Vaneker, T. H. J. & van Houten, F. J. A. M.https://doi.org/10.1016/S0007-8506(07)60382-5
2004
What-if design: A preliminary architecture and a survey of the main constituting elements (2004)In Tools and Methods of Competitive Engineering: Proceedings of the TMCE 2004, April 13-17, 2004, Lausanne, Switzerland (pp. 453-464). Millpress. Hittorf, G., Vaneker, T. H. J. & van Houten, F. J. A. M.'What-if design'; A generic approach based on information management (2004)In Proceedings of the International Conference on Competitive Manufacturing (COMA'04) (pp. 119-124). Lutters, D., Vaneker, T. H. J. & van Houten, F. J. A. M.'What-if-design'; An illustration of applicability in the field of mechanical design (2004)In Proceedings of the International Conference on Competitive Manufacturing (COMA '04) (pp. 235-240). Vaneker, T. H. J., Lutters, D., Hittorf, G. & van Houten, F. J. A. M.'What-if' design: a synthesis method in the design process (2004)CIRP annals : manufacturing technology, 53(1), 113-116. Lutters, D., Vaneker, T. H. J. & van Houten, F. J. A. M.https://doi.org/10.1016/S0007-8506(07)60657-X
2001
Development of an integrated design tool for aluminium extrusion dies: The use of the medial axis transformation in die design (2001)[Thesis › PhD Thesis - Research UT, graduation UT]. Ipskamp Printing. Vaneker, T. H. J.
2000
Development of a 3-D die design tool for aluminium extrustion (2000)In Proceedings of the 7th International Aluminium Extrusion Technology Seminar; Profiles of Change (ET2000) (pp. 245-250). Nilsen, K. E., Koenis, P. T. G., van Houten, F. J. A. M. & Vaneker, T. H. J.
1999
The development of a die design support system for aluminium extrusion (1999)In Proceedings of the 6th International Conference on Technology of Plasticity (ICTP) (pp. 309-314). Nilsen, K. E., Kals, H. J. J., van Houten, F. J. A. M. & Vaneker, T. H. J.
1997
Integrated aluminium extrusion die design (1997)[Other contribution › Other contribution]. Vaneker, T. H. J.